PMC Calibration Portal Offers User-Friendly Expanded Capabilities

When customers research test equipment calibration labs, accreditation, skill, customer service and added benefits are all considered. In an effort to best meet the needs of our customers, PMC Calibration recently unveiled a new, more user-friendly calibration portal. The new calibration portal is equipped with a new interface that makes it easy for customers to [...]

2018-07-11T15:47:33-05:00July 1st, 2018|

Test & Measurement, Thermal Imaging and More Solutions for the Mining Industry

ISO / IEC 17025 Accredited Calibration Lab, Products, Rentals, Repairs and More Supply the Mining and Metallurgy Industry  Process Measurement Company and Lakeland Engineering Equipment Company provide tailored electrical solutions, test & measurement equipment and ISO/IEC 17025 accredited calibration equipment to customers in the mining and minerals industry. Together, we offer the most complete selection [...]

2018-03-07T09:38:35-05:00March 5th, 2018|

Backflow Prevention & RPZ Testing Requirements

Is your sprinkler system equipped to pass the backflow prevention testing requirements? Did you know that state laws require backflow or reduced pressure zone (RPZ) testers to be verified on an annual basis? An RPZ must be tested by a certified backflow assembly tester with the properly calibrated equipment at the time of installation and [...]

2018-03-06T16:49:46-05:00February 20th, 2018|

Transmille 4000 Series Calibrator Advances Test & Measurement Calibration Services

PMC’s ISO / IEC 17025 accredited calibration lab recently expanded their capabilities with the purchase of the Transmille 4000 series advanced multi-product calibrator. This system is a state of the art calibration technology that allows for a greater range of calibration capabilities at a higher performance level. Transmille 4000 Series Calibration Capabilities: Built-in procedure mode [...]

2018-01-09T16:28:42-05:00January 8th, 2018|

Calibration Services for Physical, Electrical, Dimensional, and Mechanical Products

  Did you know that PMC is an ISO/IEC 17025:2005 accredited calibration lab? We offer calibration services to a wide variety of industries, including oil and gas, food and agriculture, utilities, electrical contracting, building safety, manufacturing, medical, and aviation. What Types of Test and Measurement Calibration Services Does PMC Offer? PMC calibrates, repairs, and certifies electrical, dimensional, mechanical, [...]

2017-11-02T11:42:51-05:00October 30th, 2017|

Renting Electrical Test Equipment after Hurricane Flooding

The recent hurricanes have left many with the need to purchase or rent electrical test equipment and cables to test functionality and safety. These cities have been left devastated and are slowly in the process of rebuilding. During this rebuilding process, it is important to consider the damages that your electrical cables and equipment may [...]

2017-09-22T16:23:12-05:00September 12th, 2017|

SYSTEM SOLUTIONS FOR OPERATIONAL EFFICIENCY

At Lakeland and PMC, we are committed to providing system solutions to keep your operations running smoothly. With products and services from Lakeland and PMC, we can help your customer’s processes run more efficiently, extend facility life, and make operations more reliable and consistent. PMC provides the most complete selection of electrical components, solutions, and [...]

2017-09-14T08:40:49-05:00August 28th, 2017|

Why is Calibration Important?

Ensuring that a piece of equipment is functioning safely and meets manufacturer specifications is an important part of workplace safety and quality assurance. Over time, equipment will degrade and start drifting as cumulative usage increases and environmental conditions change. The degradation of equipment may not be noticeable during normal operation but could have dire consequences, including systems [...]

2016-12-15T10:28:20-05:00December 11th, 2016|

PMC Expands High Voltage Testing Capabilities to 195 kV with New High Voltage Dividers.

PMC Calibration is excited to announce the acquisition of several Ross Engineering High Voltage Dividers. The models acquired include the VD-30, VD-120, and VD-195. Ross Engineering’s precision high voltage dividers are calibration standards that have expanded our high voltage testing capabilities to 195 kV. Any of PMC’s four locations can now test all of your [...]

2016-12-14T15:08:12-05:00September 16th, 2016|

Avoid The Audit Stress, Partner With PMC-Calibration!

Audits can be a stressful time of year for any company. Auditors tend to have a knack of finding the one calibration certificate that has magically gone missing.  This often leads to frantically sifting through an endless filing cabinet for the certificate the auditor so desperately needs to see. Avoid this all together by partnering [...]

2016-12-14T14:58:26-05:00April 1st, 2016|

The Importance of Using an ISO/IEC 17025 Accredited Laboratory

ISO/IEC 17025 accreditation is the single most important standard for calibration and testing laboratories around the world. ISO 17025 accredited laboratory's have demonstrated that they are technically proficient and able to produce precise and accurate test and calibration data. This is a voluntary, third party-reviewed process that ensures a laboratory’s quality management system is thoroughly [...]

2016-12-14T14:15:01-05:00January 12th, 2016|

PMC Calibration Acquires Fluke 2465A Gas Piston Gauge

PMC Calibration is excited to announce their acquisition of the Fluke 2465A Gas Piston Gauge. The Fluke 2465A Gas Piston Gauge is a calibration instrument that allows us to test high precision pressure instruments, so all those smart manometers or pressure modules that you used to have to send back to the manufacturer for calibration can [...]

2016-12-14T14:17:42-05:00December 14th, 2015|