About Amanda Weldon

This author has not yet filled in any details.
So far Amanda Weldon has created 33 blog entries.

ISO 8655-2 Accredited Pipette Calibration Services

PMC Calibration Lab is ISO 17025 and ISO 8655-2 Accredited PMC Calibration recently expanded their ISO 17025 calibration lab offerings to include accredited pipette calibration services. Regular calibration of medical equipment is vital to ensure that the instruments are accurately measuring the correct volumes of liquid to produce quality results in the [...]

2019-05-21T09:01:47-05:00May 15th, 2019|

Backflow Prevention & RPZ Testing Requirements

ISO Accredited RPZ Testing for Backflow Prevention Is your sprinkler system equipped to pass the backflow prevention testing requirements? Did you know that state laws require backflow testers or reduced pressure zone (RPZ) testers to be verified on an annual basis? An RPZ must be tested by a certified backflow assembly tester with the properly [...]

2019-05-10T10:27:56-05:00May 9th, 2019|

Is Your Electrical Equipment Wet from Flooding? Safety Test Your Electrical Equipment with a Megger Tester or Cable Locator

Recently, many parts of the Midwest have been impacted by flooding. Wet or flooded electrical equipment and cables can cause potential functionality, reliability and safety hazards. To avoid these hazards, test your electrical equipment to find out when the insulation is free of moisture. This is commonly referred to as an insulation resistance test or [...]

2019-04-08T15:55:31-05:00April 8th, 2019|

Join PMC at the Energy Generation Conference

Join Process Measurement Company (PMC) at the Energy Generation Conference, booth #1211, on January 29 to 31 at Bismarck State College in Bismarck, North Dakota. PMC will showcase their products and solutions at EGC for energy conservation. Stop by to talk with our product and application specialists, watch demos, collect collateral and receive giveaways. Products PMC Provides: [...]

2018-12-10T16:08:17-05:00December 6th, 2018|

Remote Energy Monitoring Solutions for DENT PowerScout Products

Whether you are running a manufacturing facility, data center, or a commercial building, energy costs can have an impact on profitability. To help, Process Measurement Company (PMC) and DENT Instruments have introduced an advanced remote energy monitoring solution with the ability to easily compare energy usage and control costs across multiple sites. This monitoring solution [...]

2019-03-01T09:38:56-05:00December 1st, 2018|

10% Off Data Loggers, Test Tools, Hand Tools and Sensors

10% off Select Products with Promo Code YEAREND10 End of year budget to use? Now is the perfect time to buy the test and measurement equipment that your company needs. Process Measurement Company is running an end of year sale, offering 10% off data loggers, hand tools, test tools and sensors through December 31, 2018. [...]

2018-12-19T08:27:12-05:00November 28th, 2018|

Process Measurement Company & MadgeTech Bring Oven Mapping Solution to Medical Device Manufacturer

OVERVIEW Process Measurement Company (PMC) was recently approached by a medical device manufacturer to conduct an oven mapping study. A report of these results is requested on an annual basis to prove compliance with government and company policy. The customer had certain temperature, tolerance, and timing requirements. To accomplish the oven mapping study, PMC used [...]

2018-08-30T15:57:46-05:00August 30th, 2018|

New Setra Industrial Pressure Sensing Product Selection Guide

Searching for the right pressure sensing solution? Setra recently released their new Industrial Product Selection Guide. With this new tool, you can feel confident that you’re selecting the transducer that has the right options, uses the right technology, and is the right overall solution for your application. This comprehensive solution guide is for: Industrial OEMs [...]

2018-08-20T10:18:38-05:00August 16th, 2018|

PMC Calibration Portal Offers User-Friendly Expanded Capabilities

When customers research test equipment calibration labs, accreditation, skill, customer service and added benefits are all considered. In an effort to best meet the needs of our customers, PMC Calibration recently unveiled a new, more user-friendly calibration portal. The new calibration portal is equipped with a new interface that makes it easy for customers to [...]

2018-07-11T15:47:33-05:00July 1st, 2018|

Ask the Experts – Benefits of Temperature Controllers & Sensors

PID or temperature controllers are commonly used in applications where the user is looking to regulate temperature or create certain conditions where the temperature rises or falls based on set parameters. PID and temperature controllers are often used in industrial applications including where ovens are present such as large manufacturers of baked goods, injection molding [...]

2018-07-11T11:37:52-05:00June 28th, 2018|

Portable and Permanent Instruments for Power Monitoring

Measuring electrical energy can provide valuable information in industrial and commercial environments, conserve energy, improve efficiency and reduce costs overtime. Power monitoring or power measurement can be used for sub-monitoring tenants for billing purposes or machine or plant efficiency. There are two basic types of power monitoring equipment – portable instruments that are used for [...]

2018-07-11T15:51:46-05:00June 19th, 2018|

New Megger DET2/3 Advanced Ground Resistance Tester

Megger recently released a new robust and compact automatic earth ground resistance tester, the Megger DET2/3. This product is designed to measure earth electrode resistance and soil resistivity on large or more complex earth systems, including communications earth systems and difficult test environments. The Megger DET2/3 has a microprocessor controlled system, providing a flexible and [...]

2018-07-11T11:53:46-05:00June 14th, 2018|