• PieCal 334 Milliamp Calibrator

PieCal 334 Milliamp Calibrator

$749.00

With the PIECAL 334 milliamp calibrator you can check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp DC loop. It can be used at any access point in your loop. Source & Read 0.00 to 24.00 mA, Simulate a 2 Wire Transmitter or use the PIECAL 334 milliamp calibrator to simultaneously power your 2 Wire Transmitter and measure its output.

FREE N.I.S.T. Traceable Calibration Certificate with purchase.

DATASHEET

 

Category:

Product Description

With the PIECAL 334 milliamp calibrator you can check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp DC loop. It can be used at any access point in your loop. Source & Read 0.00 to 24.00 mA, Simulate a 2 Wire Transmitter or use the PIECAL 334 milliamp calibrator to simultaneously power your 2 Wire Transmitter and measure its output. With the PIECAL 334 milliamp calibrator you can calibrate recorders, digital indicators, stroke valves or any instruments that get their input from a 4 to 20 mA loop. Easily set any value quickly to within 0.01 mA with the adjustable digital potentiometer “DIAL” or use preset 4.00 mA (0.0%) and 20.00 mA (100.0%) EZ-CHECK™ settings. The PIECAL 334 can simultaneously output 24V DC to power any and all devices in a process loop using the internal batteries and internal switching power supply, while measuring the output of a 2 Wire Transmitter and any other loop devices. Practical Instrument Electronics (PIE) is the technology leader in Process Loop Calibrators. Practical Instruments manufactures the leading edge in Milliamp (mA), Voltage (V), RTD, Thermocouple (T/C), and Multifunction handheld calibrators.

Calibrate Milliamp Instruments

  • Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
  • Read 0.00 to 52.00 mA
  • Read -99.99 to 99.99 V
  • Simulate 2-Wire Transmitters; Power & Read 2-Wire Transmitters
  • Accurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs
  • Use in the Plant, Field or Shop
  • Includes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage
  • Simple Battery Changes
  • Separate compartment for no-tool battery changes with four inexpensive “AA” batteries

PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators
manufactured by Fluke* under the Altek* label. The PIECAL 334 improves upon other brands by including a rubber
boot, tilt stand, backlit display with larger digits, rugged switches and a battery compartment for fast battery
changes.

Additional Information

Weight 1 lbs
Dimensions 6 x 3 x 2 in

Reviews

There are no reviews yet.

Be the first to review “PieCal 334 Milliamp Calibrator”

Your email address will not be published. Required fields are marked *

Return To Shop